d a t a s h e e t : c l d - c t 1 6 2 . 0 0 0 cree ? smd led model # lp6-pwr-03-n data sheet 120-degree, 6.0 x 5.0 mm, smt led in warm white color with water-transparent lens applications indicators illuminations lcd back lights automobile applications absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit forward current i f 3 x 50 ma peak forward current note 1 i fp 3 x 100 ma reverse voltage v r 5 v power dissipation p d 3 x 255 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 c junction/ambient note 2 r thja 3 x 300 c/w junction/solder point r thjs 3 x 160 c/w notes: pulse width 0.1 msec, duty 1/10. rth test condition: mounted on pcb fr4 (pad size 40 mm 2 ) typical electrical & optical characteristics (t a = 25c ) characteristics symbol condition unit minimum typical maximum forward voltage v f i f = 3 x 50 ma v 4.0 5.1 reverse current i r v r = 5 v a 10 luminous intensity i v i f = 3 x 50 ma mcd 1800 3100 luminous flux v i f = 3 x 50 ma mlm 9000 color temperature cct i f = 3 x 50 ma k 3200 chromaticity coordinates x i f = 3 x 50 ma 0.426 y i f = 3 x 50 ma 0.407 50% power angle 2? i f = 3 x 50 ma deg 120 ? ? ? ? 1. 2. subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct62.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lp6-pwr-03-n (i f = 3 x 50 ma) lamps are sorted to luminous intensity (i v ) and chromaticity coordiates (x,y) bins shown. orders for LP6-PWR1-03-N1 may be flled with any or all bins contained as below. all luminous intensity (i v ) and chromaticity coordinates (x,y) values shown and specifed are at i f = 3 x 50 ma. d e f y2 y1 x2 x1 rank d e f chromaticity coordinates x 0.3541 0.3610 0.4030 0.3822 0.3822 0.4030 0.4490 0.4129 0.4129 0.4490 0.5080 0.4588 y 0.3401 0.3900 0.4250 0.3580 0.3580 0.4250 0.4530 0.3725 0.3725 0.4530 0.4720 0.3838 important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. tolerance of measurement of luminous intensity is 10%. tolerance of measurement of the color coordinates is 0.01. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. chromaticity coordinates (x,y) luminous intensity (i v ) 4500 mcd 3550 mcd 2800 mcd 2240 mcd 1800 mcd
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cld-ct62.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps cie chromaticity diagram 4/5 format #: cotco-d-074 rev.4 document no. spe/LP6-PWR1-03-N1 rev. no. 05 cie chromaticity diagram cie 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 x y 520 530 540 55 560 57 580 590 600 610 620 630 510 490 480 470 46 d f e
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct62.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 5/5 format #: cotco-d-074 rev.4 document no. spe/LP6-PWR1-03-N1 rev. no. 05 g g r r a a p p h h s s fig.4 relative luminous intensity vs. 700 50% 75% 0% 25% 500 wavelength. 400 600 800 half power wl=150nm fig.2 reverse current vs. reverse voltage. 100% vr(v) -50 -40 -30 -20 -40.0 -50.0 ir(ua) 0.0 -20.0 -10.0 -30.0 -10 0 100 fig.5 maximum forward dc current vs temperature. derating based on tjmax=110 c rth j-a=300c/w 20 0 0 6040 80 rth j-s=160 c/w if(ma) 80 20 40 60 100 t ( c) 4.6 fig.1 forward current vs. forward voltage. 3.0 0.0 20.0 60.0 40.0 80.0 3.8 3.4 4.2 100.0 if (ma) vf(v) 5.0 80.0 fig.3 relative luminous intensity vs. 0.5 0.0 forward current 0.0 40.0 20.0 60.0 1.0 1.5 2.0 2.5 100.0 if(ma) fig.6 far field pattern 0 0 50% power angle : -60 -90 -30 100% 80% 40% 0% 20% 60% 30 60 90 ie(%) items signatures date revision history prepared by wangfj 2007-04-26 rev.no date change description change vf(avg) from 4.0v to 4.5v,vf(max) from 4.6v to 5.1v; pd from 3x230 mw to 3x255 mw; change graphs. checked by 03 2005-11-02 xiejh 2007-04-26 approved by davidliu 2007-04-26 04 2007-01-11 change vf(typ)4.5 to 4.0, change graphs. fcn# fcn20070103 05 2007-04-26 change tolerance of cie(x,y) from +/-0.015 to +/-0.01 data is subject to change without prior notice; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct62.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentr ation values (also referred to as the threshold limits) permitted for such substances, or are used in an ex empted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the ey e. 2/5 format #: cotco-d-074 rev.4 document no. spe/LP6-PWR1-03-N1 rev. no. 05 a a p p p p l l i i c c a a t t i i o o n n s s : : d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - indicators - illuminations - lcd back lights - automobiles applications a a b b s s o o l l u u t t e e m m a a x x i i m m u u m m r r a a t t i i n n g g s s a a t t t t a a = = 2 2 5 5 c items symbol absolute maximum rating unit 3 x 50 i ma forward current f 3 x 100 i ma peak forward current* fp 5 v v reverse voltage r 3 x 255 p mw power dissipation d -40 ~ + 100 t c operation temperature opr -40 ~ + 100 t c storage temperature stg tj +110 c junction temperature junction/ambient ** rth ja 3 x 300 c /w junction/solder point rth js 3 x 160 c /w *pulse width<=0.1msec duty <=1/10 ** rth test condition: mounted on pc board fr 4(pad size>=40mm 2 ) t t y y p p i i c c a a l l e e l l e e c c t t r r i i c c a a l l & & o o p p t t i i c c a a l l c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s ( ( t t a a = = 2 2 5 5 c ) ) items symbol condition min. typ. max. unit = 3 x 50ma --- 4.0 5.1 v forward voltage v i f f reverse current i v = 5v --- --- 10 p a r r luminous intensity i i v f = 3 x 50ma mcd 1800 3100 --- luminous flux - i v f = 3 x 50ma mlm --- 9000 --- color temperature cct i f = 3 x 50ma --- 3200 --- k x i = 3 x 50ma --- 0.426 --- --- f chromaticity coordinates = 3 x 50ma --- 0.407 --- --- y i f = 3 x 50ma --- 120 --- deg 50% power angle 2 t ? i f
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 6 cld-ct62.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LP6-PWR1-03-N1-00001 smd 120 warm white, full rank, tape & reel LP6-PWR1-03-N1-00002 smd 120 warm white, e,f, tape & reel * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tape pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
